Introduction to Underfloor

There are three primary advantages to using underfloor heating systems as opposed to traditional convection-based heating:

Underfloor Products

Heating Pump Mixer Set

Heating Pump Mixer Set

Description: Modern underfloor distribution systems benefit from advances made by manufacturers to supply purpose made sets which combine the pump and the blending valve to circulate and regulate the temperature.

Manifolds

Manifolds

Description: The manifold allows controlled distribution of water flow to all the heating loops. From this point on commissioning, each heating loop can be calibrated to receive its design optimum flow of heated water.

S1 preassembled manifold

S1 Preassembled Manifold

Description: The manifold allows controlled distribution of water flow to all the heating loops. From this point on commissioning, each heating loop can be calibrated to receive its design optimum flow of heated water.

thermoplastic manifold

Thermoplastic Manifold

Description: Modular system, each outlet being an individual segment. Supplied pre-assembled with moulded end plates and moulded connection segments that include automatic air-venting and self sealing fill and drain port with hose fitting.

Heating Control System

Heating Control System

Description: Temperature control for the home should be both user-friendly and energy efficient, but also complimentary to the décor with additional attention focused on styling.

Intaeco have produced a visually stunning concept of temperature and time control home fittings, featuring advanced temperature control technology

thermo-electric actuator

Thermo-Electric Actuator

Description: For the automatic opening and closing of the connections on the distribution manifold, allowing for heating multi-zone control.

underfloor blending valve

Blending Valve

Description: For blending flow and return water and achieving a lower temperature (as required to safely heat under floor) higher temperatures may cause damage to tiled or wooden floors.

darcal fitting

Darcal Fitting

Description: Fittings for the connection of plastic pipes to the S1 manifold range. Self adjusting diameter for single and multi-layer pipe. Extensive range of sizes available.